DL16 (M) Proxy - HITEC International

Dimensions: 120x43x22 mm
Reading distance: 8 cm.

Notes:

By default, readers are delivered in black. Special orders may be done in grey (G)
Letter ‘M’ stands for 13,56 Mhz Smart card reader (instead of EM 125Khz).

Main Features

Type of cable:
Wiegand interface: 8 wires shielded cable, 22 AWG., Max 150m
Built-in audible buzzer acknowledging card reading and bicolor Led acknowledging access.
Reading Standard:
- DL12, DL13, DL16, DK23:
Wiegand 26-Bit 125KHz EM.
- DL12M, DL13M, DL16M, DK23M:
Wiegand 26-Bit and 34-Bit 13,56 Mhz.
ISO14443A, ISO14443B (Mifare)
Operating Voltage Range: 5 – 16 VDC
Tamper Output: a built-in a tamper switch (Optical detection. N.C. mode) allows raising an alarm when the reader is removed from the wall or the cable is cut.
Hidden mounting screws deters vandalism.
The DL13 and the DK23 were designed to fit global electrical back boxes with a 60mm space between holes.
Operating Temp. range : -30°C to 65°C .
Operating Humidity: 0-90% (relative non-condensing)
Reader consumption: Typical: 80mA, Max: 150mA Indoor/Outdoor Design

Controller Dip Switches

TPL: JP4/6: on, JP4/7: off, JP4/8: off. On TPL Rev.D1, Set Dip switch DS2/4 to ‘on’.

OPEN, SMART, NTL, TPLDR, JET and MEGA: DS1/6: on, DS1/7: off, DS1/8: off.

Note on Decimal Wiegand cards

When using 26 bits EM decimal prox cards, set, via the PC application software, the controller to read 26 bits Wiegand decimal code.